ماڵپەڕێن بەڵاڤوکێن زانستی
بەڵاڤوکێن
[1] B.A. Tayeh, M.H. Akeed, S. Qaidi, B.A. Bakar, Influence of microsilica and polypropylene fibers on the fresh and mechanical properties of ultra-high performance geopolymer concrete (UHP-GPC), Case Studies in Construction Materials 17 (2022) e01367.
[2] S.M. Qaidi, B.A. Tayeh, A.M. Zeyad, A.R. de Azevedo, H.U. Ahmed, W. Emad, Recycling of mine tailings for the geopolymers production: A systematic review, Case Studies in Construction Materials 16 (2022) e00933.
[3] S.M. Qaidi, B.A. Tayeh, H.F. Isleem, A.R. de Azevedo, H.U. Ahmed, W. Emad, Sustainable utilization of red mud waste (bauxite residue) and slag for the production of geopolymer composites: A review, Case Studies in Construction Materials 16 (2022) e00994.
[4] S.M. Qaidi, Y.Z. Dinkha, J.H. Haido, M.H. Ali, B.A. Tayeh, Engineering properties of sustainable green concrete incorporating eco-friendly aggregate of crumb rubber: A review, Journal of Cleaner Production 324 (2021) 129251.
[5] S.M. Qaidi, D.S. Atrushi, A.S. Mohammed, H.U. Ahmed, R.H. Faraj, W. Emad, B.A. Tayeh, H.M. Najm, Ultra-high-performance geopolymer concrete: A review, Construction and Building Materials 346 (2022) 128495.
[6] S. Qaidi, H.M. Najm, S.M. Abed, Y.O. Özkılıç, H. Al Dughaishi, M. Alosta, M.M.S. Sabri, F. Alkhatib, A. Milad, Concrete containing waste glass as an environmentally friendly aggregate: a review on fresh and mechanical characteristics, Materials 15(18) (2022) 6222.
[7] S. Qaidi, Y.S. Al-Kamaki, R. Al-Mahaidi, A.S. Mohammed, H.U. Ahmed, O. Zaid, F. Althoey, J. Ahmad, H.F. Isleem, I. Bennetts, Investigation of the effectiveness of CFRP strengthening of concrete made with recycled waste PET fine plastic aggregate, PLoS One 17(7) (2022) e0269664.
[8] A. Mansi, N.H. Sor, N. Hilal, S.M. Qaidi, The impact of nano clay on normal and high-performance concrete characteristics: a review, IOP Conference Series: Earth and Environmental Science, IOP Publishing, 2022, p. 012085.
[9] R.H. Faraj, H.U. Ahmed, S. Rafiq, N.H. Sor, D.F. Ibrahim, S.M. Qaidi, Performance of Self-Compacting mortars modified with Nanoparticles: A systematic review and modeling, Cleaner Materials 4 (2022) 100086.
[10] F. Aslam, O. Zaid, F. Althoey, S.H. Alyami, S.M. Qaidi, J. de Prado Gil, R. Martínez‐García, Evaluating the influence of fly ash and waste glass on the characteristics of coconut fibers reinforced concrete, Structural Concrete 24(2) (2023) 2440-2459.
[11] I. Almeshal, M.M. Al-Tayeb, S.M. Qaidi, B.A. Bakar, B.A. Tayeh, Mechanical properties of eco-friendly cements-based glass powder in aggressive medium, Materials Today: Proceedings 58 (2022) 1582-1587.
[12] M.M. Al-Tayeb, Y.I.A. Aisheh, S.M. Qaidi, B.A. Tayeh, Experimental and simulation study on the impact resistance of concrete to replace high amounts of fine aggregate with plastic waste, Case Studies in Construction Materials 17 (2022) e01324.
[13] M.H. Akeed, S. Qaidi, R.H. Faraj, A.S. Mohammed, W. Emad, B.A. Tayeh, A.R. Azevedo, Ultra-high-performance fiber-reinforced concrete. Part II: Hydration and microstructure, Case Studies in Construction Materials 17 (2022) e01289.
[14] M.H. Akeed, S. Qaidi, R.H. Faraj, A.S. Mohammed, W. Emad, B.A. Tayeh, A.R. Azevedo, Ultra-high-performance fiber-reinforced concrete. Part I: Developments, principles, raw materials, Case Studies in Construction Materials 17 (2022) e01290.
[15] M.H. Akeed, S. Qaidi, R.H. Faraj, S.S. Majeed, A.S. Mohammed, W. Emad, B.A. Tayeh, A.R. Azevedo, Ultra-high-performance fiber-reinforced concrete. Part V: Mixture design, preparation, mixing, casting, and curing, Case Studies in Construction Materials 17 (2022) e01363.
[16] M.H. Akeed, S. Qaidi, H.U. Ahmed, R.H. Faraj, A.S. Mohammed, W. Emad, B.A. Tayeh, A.R. Azevedo, Ultra-high-performance fiber-reinforced concrete. Part IV: Durability properties, cost assessment, applications, and challenges, Case Studies in Construction Materials 17 (2022) e01271.
[17] M.H. Akeed, S. Qaidi, H.U. Ahmed, W. Emad, R.H. Faraj, A.S. Mohammed, B.A. Tayeh, A.R. Azevedo, Ultra-high-performance fiber-reinforced concrete. Part III: Fresh and hardened properties, Case Studies in Construction Materials 17 (2022) e01265.
[18] Y.I.A. Aisheh, D.S. Atrushi, M.H. Akeed, S. Qaidi, B.A. Tayeh, Influence of steel fibers and microsilica on the mechanical properties of ultra-high-performance geopolymer concrete (UHP-GPC), Case Studies in Construction Materials 17 (2022) e01245.
[19] Y.I.A. Aisheh, D.S. Atrushi, M.H. Akeed, S. Qaidi, B.A. Tayeh, Influence of polypropylene and steel fibers on the mechanical properties of ultra-high-performance fiber-reinforced geopolymer concrete, Case Studies in Construction Materials 17 (2022) e01234.
[20] S.N. Ahmed, N.H. Sor, M.A. Ahmed, S.M. Qaidi, Thermal conductivity and hardened behavior of eco-friendly concrete incorporating waste polypropylene as fine aggregate, Materials Today: Proceedings 57 (2022) 818-823.
[21] H.U. Ahmed, A.S. Mohammed, S.M. Qaidi, R.H. Faraj, N. Hamah Sor, A.A. Mohammed, Compressive strength of geopolymer concrete composites: a systematic comprehensive review, analysis and modeling, European Journal of Environmental and Civil Engineering 27(3) (2023) 1383-1428.
[22] H.U. Ahmed, A.S. Mohammed, R.H. Faraj, S.M. Qaidi, A.A. Mohammed, Compressive strength of geopolymer concrete modified with nano-silica: Experimental and modeling investigations, Case Studies in Construction Materials 16 (2022) e01036.
[23] H.U. Ahmed, A.A. Mohammed, S. Rafiq, A.S. Mohammed, A. Mosavi, N.H. Sor, S. Qaidi, Compressive strength of sustainable geopolymer concrete composites: a state-of-the-art review, Sustainability 13(24) (2021) 13502.
[24] H.U. Ahmed, L.J. Mahmood, M.A. Muhammad, R.H. Faraj, S.M. Qaidi, N.H. Sor, A.S. Mohammed, A.A. Mohammed, Geopolymer concrete as a cleaner construction material: An overview on materials and structural performances, Cleaner Materials (2022) 100111.
[25] J. Ahmad, F. Aslam, R. Martinez-Garcia, J. de-Prado-Gil, S.M. Qaidi, A. Brahmia, Effects of waste glass and waste marble on mechanical and durability performance of concrete, Scientific Reports 11(1) (2021) 21525.
[26] A.İ. Çelik, Y.O. Özkılıç, Ö. Zeybek, M. Karalar, S. Qaidi, J. Ahmad, D.D. Burduhos-Nergis, C. Bejinariu, Mechanical Behavior of Crushed Waste Glass as Replacement of Aggregates, Materials 15(22) (2022) 8093.
[27] Ö. Zeybek, Y.O. Özkılıç, M. Karalar, A.İ. Çelik, S. Qaidi, J. Ahmad, D.D. Burduhos-Nergis, D.P. Burduhos-Nergis, Influence of Replacing Cement with Waste Glass on Mechanical Properties of Concrete, Materials 15(21) (2022) 7513.
[28] W. Emad, A.S. Mohammed, A. Bras, P.G. Asteris, R. Kurda, Z. Muhammed, A.M.T. Hassan, S.M.A. Qaidi, P. Sihag, Metamodel techniques to estimate the compressive strength of UHPFRC using various mix proportions and a high range of curing temperatures, Construction and Building Materials 349 (2022) 128737.
[29] S.M.A. Qaidi, A.S. Mohammed, H.U. Ahmed, R.H. Faraj, W. Emad, B.A. Tayeh, F. Althoey, O. Zaid, N.H. Sor, Rubberized geopolymer composites: A comprehensive review, Ceramics International 48(17) (2022) 24234-24259.
[30] X. He, Z. Yuhua, S. Qaidi, H.F. Isleem, O. Zaid, F. Althoey, J. Ahmad, Mine tailings-based geopolymers: A comprehensive review, Ceramics International 48(17) (2022) 24192-24212.
[31] S.M.A. Qaidi, B.A. Tayeh, H.U. Ahmed, W. Emad, A review of the sustainable utilisation of red mud and fly ash for the production of geopolymer composites, Construction and Building Materials 350 (2022) 128892.
